A canton in Switzerland commissioned a project in which solar panels were attached vertically to a roadside retaining wall.
The canton of Appenzell Ausserhoden in northeastern Switzerland is aiming to generate at least 40% of its electricity from renewables by 2035. So, it exercised a little creativity and covered a roadside retaining wall with 756 glass-glass solar panels.
The panels have an output of 325 kW and an energy yield of around 230,000 kWh annually. This is equivalent to the consumption of about 52 Swiss households. The energy will be fed into the grid of energy supplier St. Gallisch-Appenzellische Kraftwerke, and the canton will get a feed-in tariff in return.
German mounting system provider K2 Systems and Swiss contractor Solarmotion installed the vertical system on the 75-degree retaining wall. The panels were anchored on a mounting rail with HUS screw anchors, and Lichtenstein-based Hilti provided mechanical dowels.
The PV system was anchored on and in the masonry using an adhesive technique. An anchoring depth of a maximum of 90 mm could not be exceeded so that the retaining wall would not be adversely affected.
Due to the close proximity to the asphalt, the solar panels’ components are subject to exceptional corrosion requirements and are anodized for protection. Indirect components are made of aluminum – only the screw anchors are made of stainless steel.
K2 Systems says that “especially in the winter months (when consumption and dependence on foreign electricity imports are at their highest), the vertically aligned modules will achieve a very good electricity yield.”
Electrek’s Take
This isn’t a big project, but it’s a delightfully creative one, which is why it caught my eye. A retaining wall is dead space, and snow will slide off the panels in Swiss winters.
We at Electrek love it when solar is installed in intelligent and inventive ways. Warehouse rooftops? Cover them. Highway medians? Canal covers? Box stores? Put solar on them. It just makes sense.
Source : Electreck